How to Put On Celsius Ice Cleats: A Step-by-Step Guide for Winter Walking
Learn how to put on Celsius ice cleats correctly so they grip your boots snugly, stay in place on ice, and come off easily when you get indoors.
Updated November 2026
Learning how to put on Celsius ice cleats takes about a minute once you know the order of operations. The goal is a snug fit with the rubber or metal traction sitting centered under the ball and heel of your boot, with no slack that lets the cleat slide. Done right, your footwear stays put on packed snow and glazed sidewalks.
Before You Start: Check Fit and Surface
Celsius cleats are designed to stretch over the sole and secure around the upper of most walking shoes and winter boots. Before you put them on, confirm the cleat size matches your shoe size using the sizing guidance printed on the packaging. A cleat that is too small will strain and snap, while one that is too large will shift. Work on a dry, flat surface such as a doormat or entryway, not on the ice itself, so you do not slip while bending down.
Step-by-Step: Putting the Cleats On
- Lay the cleat flat and identify the front (the section with the traction studs) and the heel loop.
- Stretch the front of the cleat over the toe of your boot, positioning the studs under the ball of your foot.
- Pull the heel portion back over the heel, keeping the rubber centered and flat against the sole.
- Tighten or adjust any straps or elastic so the cleat hugs the boot without bunching.
- Stand up, shift your weight forward and back, and check that nothing rotates or lifts.
Adjusting for a Secure Fit
Most slipping comes from a cleat that sits even slightly off-center. After you stand up, look down at the placement. The studs should cover the sole from the ball of the foot forward, with the heel fully covered. If the rubber has ridden up toward the toe, remove the cleat, realign it, and start again. Rebound the elastic gently rather than yanking it, since sharp pulling can tear the material over time.
Test Your Stance
Walk a few steps on a non-slippery surface first. You should feel the studs engage with the boot sole without a loose, clicking sensation. If the cleat feels tight across the top of your foot, loosen it slightly. Circulation matters, so a cleat that pinches or numbs your toes is too tight.
Removing Them Safely
Take cleats off indoors while standing on a mat, not on a cold, wet floor. Peel the heel back first, then work the front forward. Pulling from the toe can stretch the material unevenly, so keep the motion steady. Shake off snow and dry them before storing, since trapped moisture can speed up wear on the elastic.
Common Mistakes
- Putting the cleat on with snow or ice caked onto the sole, which prevents a flat fit.
- Forcing a cleat onto a boot that is too wide or too narrow for its sizing range.
- Skipping the stance test, which leaves a loose cleat undetected until you are on ice.
- Leaving cleats on for long indoor periods, which can cause heat buildup and odor.
- Stretching the rubber repeatedly in the same spot, which weakens it.
Recommended Gear
A stiff, flat-bottomed boot gives the cleats the most stable base, so consider footwear with a defined sole when you pair them with traction gear. For dry, packed-snow walking, many people also keep a pair of simple cleat-fitting boots by the door for quick use. View on Amazon
If you clear your path often, a dependable scraper saves time before you step outside. View on Amazon
For a broader look at how traction options compare, see Traction Cleats Ice Snow Grips: Which Ones Work and How to Choose (2026). If you are still choosing a size, Ice Cleats Size Chart: How to Pick the Right Fit for Your Boots walks through measuring your shoe. Those who want a more aggressive option may compare Microspikes vs Ice Cleats (2026): Which Is Better for Winter Walking?.
FAQ
Which way do Celsius ice cleats go on?
The studded front goes under the ball of your foot, and the heel section wraps back over the heel. The rubber should sit flat and centered on the sole.
Why do my cleats keep slipping off?
They are usually too loose or off-center. Re-seat the front first, tighten the heel, and walk a few steps to confirm they hold.
Can I wear cleats on any shoe?
They work best on boots and shoes with a defined sole and a sturdy upper. Very thin or flexible soles may not hold the cleat securely.
Conclusion
To put on Celsius ice cleats, align the studs under the ball of your foot, wrap the heel snugly, and check the fit with a few test steps. Taking that extra minute to confirm placement is what keeps you steady on the ice. Store them dry and remove them indoors to keep them working well all season.
Related reading
- Ice Cleats for Metal Roof: How to Choose and Install Them Safely
- Ice Cleats for High Heels: Do They Work and How to Choose
Ready to choose one?
